Comments on: About http://www.keally.org Life of the ABD grad student... Mon, 31 Jan 2011 12:46:20 +0000 hourly 1 http://wordpress.org/?v=3.2.1 By: Matt http://www.keally.org/about/comment-page-1/#comment-327 Matt Mon, 05 Apr 2010 16:00:16 +0000 http://ironjaw.net/?page_id=2#comment-327 The IRIS isn't supported under TinyOS 1.x -- as far as I know there isn't a version 1.5. IRIS support wasn't added until 2.0.1 or 2.0.2 and there are slight hardware differences between it and other Mica-based motes so using code for another platform may not work. I suggest you move to the latest version, 2.1. The IRIS isn’t supported under TinyOS 1.x — as far as I know there isn’t a version 1.5. IRIS support wasn’t added until 2.0.1 or 2.0.2 and there are slight hardware differences between it and other Mica-based motes so using code for another platform may not work. I suggest you move to the latest version, 2.1.

]]> By: Edwin http://www.keally.org/about/comment-page-1/#comment-325 Edwin Fri, 02 Apr 2010 17:55:15 +0000 http://ironjaw.net/?page_id=2#comment-325 Hi Keally, I have a project which needs to use iris mote to detect vibration and I am using an external accelerometer integrated with a mda100cb to do the task. But i have problem with the sampling rate of the motes. I try to use the HFS to improve the sampling rate but the mircotimer in the code is written for micaz family. I would appreciate if you could give me some enlightenment. I am currently using TinyOS 1.5 Hi Keally,
I have a project which needs to use iris mote to detect vibration and I am using an external accelerometer integrated with a mda100cb to do the task. But i have problem with the sampling rate of the motes. I try to use the HFS to improve the sampling rate but the mircotimer in the code is written for micaz family. I would appreciate if you could give me some enlightenment.

I am currently using TinyOS 1.5

]]>